Jesmonite Pigments are aqueous dispersions compatible with Jesmonite composites. When dispersed in Jesmonite materials they offer excellent chemical stability, heat stability, and UV resistance. Bespoke pigments and a colour matching service is available on request. Call for further details. Pigments are available in 200g and 1,000g bottles.
Set times of all Jesmonite composite materials can be extended by the addition of Retarder to increase working time. There is a Retarder for AC100, AC200 and AC300, and a separate Retarder for the cement based materials AC730, AC830 and AC930. Please note that the end user should perform tests in the workshop environment, as extremes of temperature and humidity can effect set times. Addition rates can be found in the individual composite user guides.
Thixotrope is added so that the viscosity of Jesmonite can be adjusted to the users preference. This is particularly useful when applying a Gel Coat into a mould. By adding Thixotrope it is possible to apply a controlled 1mm – 3mm layer of material without it running off the mould surface. This also prevents glass reinforcements from showing at the face of laminated objects. Thixotrope can also be used to make the material into a paste, which can be used as a repair filler, and jointing paste for bonding two laminates together.
Metal fillers are supplied as decorative fillers for addition to AC100. They are added to a mix with an adjusted ratio (see user guide) to optimise the filler loading level. Once objects are de-moulded and dried, the surface can be burnished with 000 Wire Wool to bring out the metallic finish. The finished surface can then have a patina added using cold patina solutions to create the classic Verdi-Gris effect.
This type of glass reinforcement is tailor made for use with Jesmonite. It is based on the latest multiaxial glass reinforcement technology, which makes Jesmonite fibreglass laminates light, strong and fire resistant. It is constructed like a lace, with continuous glass strands in four axis (multiaxial) stitched together using the fireproof material Nomex®.
There are very few free filaments, making the glass safe and comfortable to use. It can be accurately cut using scissors or roller cutters, and will conform to even the most complex shapes. This makes it especially suitable to mould making and panel construction.
Please note that fibreglass matting (CSM) for use with solvent-based resins such as polyester is not suitable for use with Jesmonite materials.
These can be added to all Jesmonite composites to give increased strength in thin section castings, and also to act as a filler to assist in laminating (see relevant instructions for further details). They are available in three types: 6mm and 12mm Standard, and 12mm Coarse which are designed specifically for use with Jesmonite AC730 to create a premix. Chopped strands can also be used to add impact resistance when applying thin sections of Jesmonite to carved objects made from polystyrene.
PVA fibres are the new alternative to glass reinforcements for cement systems. They are a synthetic polyvinylalcohol fibre with chemical and physical attributes that make them particularly suitable to the Jesmonite family of Polymer Modified Cement materials. They have high strength combined with low elongation and high modulus. They provide advanced adhesion to the polymer cement matrix as well as inherent resistance to the degrading effects of the alkalinity of such a matrix. We strongly recommend their addition to Jesmonite systems when high strength retention after severe exposure make them especially suitable to resist frost damage in the most harsh external environments.